BATTENS LIGHT system consists of a range of profiles:
- 25 mm (0.98”) and 75 mm (2.95”) slats;
- 20 mm (0.79”), 30 mm (1,18”) and 40 mm(1.57”) spacers, which are useful for creating a ribbed effect;
- Cut-to-size spacer, that is helpful when the distance is different from the length of previous spacers;
- Outer corner profiles;
- Frame profiles with a LED-holder function to create light effects.
BA30026
1.18”x0.98” batten
BA30032
1.18”x2.95” batten
BA30021
1.18” cover
BA40001
1.57”x0.98” batten
BA40002
1.57”x2.95” batten
BA40003
1.57” cover
BA30001
0.79” spacer
BA30017
1.18” spacer
BA30018
1.57” spacer
BA30033
cut-to-size spacer
BA30027
0.98” corner batten
BA30028
2.95” corner batten
BA30002
fixing bar
BA30019
fixing bar cover
BA30020
suspended ceilings fixing bar
BA30025
end cut-to-size spacer
BA30024
end batten
ANG20
0.79”
L profile
BA304319
1.69” x 0.75”
L profile
BA309319
3.66” x 0.75”
L profile
BA30008
led holder for 0.98” batten
BA30007
frame for 0.98” batten
BA30023
led holder profile
BA30040
Shelf bracket
BA30041
9,84” shelf
Tools list
FA30001
1.18” batten nylon clip
FA30004
1.18” corner joint
FA30005
celloflex gasket
FA30006
corner joint for open profiles
FA30007
corner joint with outward buttons
FA30008
screen profile in polycarbonate
L = 9,84’ (3000 mm)
FA30009
right and left frame profile cap
FA30010
1.18” x 0.98” batten cap
FA30011
1.18” x 2.95” batten cap
FA30013
complementary profiles clip
FA30015
support profile for curved surfaces
L = 3,28′ (1000 mm)
FA30016
corner bracket kit for 1.57” x 2.95” batten
FA40001
1.57” batten nylon clip
FA40005
1.57” corner joint
FA40003
1.57” x 0.98” batten cap
FA40004
1.57” x 2.95” batten cap
FA30018
hanging wire with spring
FA30019
hanging wire with open eyelet
How it works
The BATTENS LIGHT cladding system is fitted to the wall with the use of a substructure and nylon clips. The clips are rotated into the wall fitting bars, and the slats are clicked in firmly on the clips. The hooking system is mechanical and sturdy, and allows therefore for quick installation and the possibility of removing the elements if needed.
Application with visibile substructure
Application with hidden substructure with spacer profiles
Application on frame profile with led holder for 1.18”/1.57” x 0.98” battens
Outer corner
with 1.18”x0.98” batten