Quick and intuitive
to install
The planks are held in place by simple stainless steel clips which guarantee a perfect mechanical grip and at the same time allow the thermal expansion of the planks. The installation of ForMe Skin is quick and intuitive. It requires no specialist skills. One single operator can apply the wall cladding system in a few simple steps, following the installation guide.
Horizontal
installation
STEP 1 – START
Wall preparation
The same for both horizontal and vertical installation.
STEP 2
Trim base and corners
STEP 3
Starter strip
STEP 4
Planks installation
Linear joint
STEP 5
Last plank
STEP 6
Finishing profiles
STEP 7
Outside corner
STEP 8
Inside corner
Thermal expansion
of the planks
If the plank is fixed directly to the wall (without the screen clip), it is forced to expand out from the wall causing a wavy warped exterior appearance.
The screen clip allows thermal expansion of the planks which prevents buckling and bowing.
The transversal dilatation of the plank is compensated by the gasket compression.
Vertical
installation
STEP 1 – START
Wall preparation
The same for both horizontal and vertical installation.
STEP 2
Trim base.
STEP 3
Planks installation
STEP 4
Planks installation
STEP 5
Planks installation
STEP 6
Finishing profiles
STEP 7
Outside corner
STEP 8
Inside corner
Specifications
of the pallet
Material will be received on a pallet.
Pallet size:
– length: 16’6” (5030 mm)
– maximum width: 29.3” (745 mm)
– maximum height: 30.1” (766 mm)
Check the labels and make sure you have all the required components in your order
All profiles are wrapped in protective paper and labelled indicating number of pieces and product type.
